Tag Archives: vSphere

Virtual Machine Swap File Location & Capacity Usage on Nutanix

Posted on by
1

The Location of the Virtual Machine swap file can be critical when deploying vSphere with traditional centralized storage solutions, or legacy solutions which acknowledge “zeros” or “White-space” as the Virtual Machine swap file can be as large as the VMs configured vRAM where Memory Reservations are not used.

The below shows the default configuration.
VMswapFileLocation

If a VM resides on Tier 1 storage for example, and the VM does not have a memory reservation set (or a reservation of less than 100%), the Swap-file will take up valuable Tier 1 storage capacity.

This can be avoided by specifying a Swap-file datastore however this introduces complexity and in the event the Swap-file datastore is on a low tier of storage, performance in the event of swapping will degrade significantly.

Some platforms recommend having different datastores for VM swap files to minimize the overheads on de duplication or replication for environments using SRM as discussed in Example Architectural Decision – Virtual Machine Swap-file location for SRM Protected VMs.

The Nutanix Distributed File System does not write “White space” to disk, as a result the impact of Virtual Machine swap files is negligible which makes the issue of swap file placement much less of an issue.

The only time when Virtual machine swap files will use storage capacity in the Nutanix Distributed File System is when host memory utilization is >100% and swapping needs to occur.

As such, the default vSphere configuration of “Virtual Machine Directory” is ideal for Nutanix environments and valuable storage capacity is not unnecessarily wasted resulting in increased usable space, reduced complexity by removing the requirement for dedicated swap-file datastores without compromising the benefits of de-duplication and compression.

What does Exchange running in a VMDK on NFS datastore look like to the Guest OS?

Posted on by
20

In response to the recent community post “Support for Exchange Databases running within VMDKs on NFS datastores” , the co-authors and I have received lots of feedback, of which the vast majority has been constructive and positive.

Of the feedback received which does not fall into the categories of constructive and positive, it appears to me as if this is as a result of the issue is not being properly understood for whatever reason/s.

So in an attempt to help clear up the issue, I will show exactly what the community post is talking about, with regards to running Exchange in a VMDK on an NFS datastore.

1. Exchange nor the Guest OS is not exposed in any way to the NFS protocol

Lets make this very clear, Windows or Exchange has NOTHING to do with NFS.

The configuration being proposed to be supported is as follows

1. A vSphere Virtual Machine with a Virtual SCSI Controller

In the below screen shot from my test lab, the highlighted SCSI Controller 0 is one of 4 virtual SCSI controllers assigned to this Virtual machine. While there are other types of virtual controllers which should also be supported, Paravirtual is in my opinion the most suitable for an application such as Exchange due to its high performance and low latency.

ExchangeVMSCSIController

2. A Virtual SCSI disk is presented to the vSphere Virtual Machine via a Virtual SCSI Controller

The below shows a Virtual disk (or VMDK) presented to the Virtual machine. This is a SCSI device (ie: Block Storage – which is what Exchange requires)

Note: The below shows the Virtual Disk as “Thin Provisioned” but this could also be “Thick Provisioned” although this has minimal to no performance benefit with modern storage solutions.

ExchangeVMVMDK

So now that we have covered what the underlying Virtual machine looks like, lets see what this presents to a Windows 2008 guest OS.

In Computer Management, under Device Manager we can see the expanded “Storage Controllers” section showing 4 “VMware PVSCSI Controllers”.

ExchangeVMPVSCSIController

Next, still In Computer Management, under Device Manager we can see the expanded “Disk Drives” section showing a number of “VMware Virtual disk SCSI Disk Devices” which each represent a VMDK.

 

 

ExchangeVMDeviceManager

 

 

 

 

Next we open “My Computer” to see how the VMDKs appear.

As you can see below, the VMDKs appear as normal drive letters to Windows.

ExchangeVMMyComputer

 

Lets dive down further, In “Server manager” we can see each of the VMDKs showing as an NTFS file system, again a Block storage device.

ExchangeVMDiskManager

Looking into one of the Drives, in this case, Drive F:\, we can see the Jetstress *.EDB file is sitting inside the NTFS file system which as shown in the “Properties” window is detected as a “Local disk”.

ExchangeVMFdriveProperties

So, we have a Virtual SCSI Controller, Virtual SCSI Disk, appearing to Windows as a local SCSI device formatted with NTFS.

So what’s the issue? Well as the community post explains, and this post shows, there isn’t one! This configuration should be supported!

The Guest OS and Exchange has access to block storage which meets all the requirements outlined my Microsoft, but for some reason, the fact the VMDK sits on a NFS datastore (shown below) people (including Microsoft it seems) mistakenly assume that Exchange is being serviced by NFS which it is NOT!

ExchangeVMDatastore

 

I hope this helps clear up what the community is asking for, and if anyone has any questions on the above please let me know and I will clarify.

Related Articles

1. “Support for Exchange Databases running within VMDKs on NFS datastores”

2. Microsoft Exchange Improvements Suggestions Forum – Exchange on NFS/SMB

Virtualizing Exchange on vSphere with NFS backed storage?

Posted on by
1

For many years, customers have been realising the benefits of file based storage from one or more of the many storage vendors offering NFS.

NFS makes a ton of sense for virtualization, and virtualizing Business Critical applications such as Exchange, along with the rest of a company’s servers, can be a great way to reduce complexity and save on CAPEX/OPEX.

However, some vendors, have licensing or support statements which make this more difficult than it needs to be.

One such vendor is Microsoft.

Microsoft currently don’t support Exchange running inside a VMDK on an NFS datastore, even though the VMDK is a virtual SCSI device and acts/performs the same as if it was on a block based LUN, such as FC/FCoE or iSCSI.

I decided to reach out to a bunch of great guys in the virtualization community to try and get some awareness of this issue, and get Microsoft to update the outdated and technically invalid support statement.

As a result, the following TechNet forum article has been posted

Support for Exchange Databases running within VMDKs on NFS datastores

There is also a suggestion in the Microsoft Product improvement forum on the same topic, which as a result of the communities efforts in the past few weeks, have seen it sky rocket to the #1 improvement suggestion to microsoft.

The post and voting can be found here.

Support storing Exchange datat on VMDKs on File shares (NFS/SMB)

So please check out these two articles, and vote and leave your comments in support of this issue. Supporting Exchange in VMDKs on NFS is a No lose situation for customers, and that is what it is all about!

Related Articles:

Integrity of Write I/O for VMs on NFS Datastores Series

Part 1 – Emulation of the SCSI Protocol
Part 2 – Forced Unit Access (FUA) & Write Through
Part 3 – Write Ordering
Part 4 – Torn Writes
Part 5 – Data Corruption