Tag Archives: vSphere

Nutanix Tech Notes for VMware vSphere

Posted on by
7

I thought I would put together a single page which has links to all the current Nutanix Tech Notes relating to VMware vSphere as well as have a bit of a teaser list of upcoming documents.

This will be a living post, and updated regularly as new documents are released.

Tech Notes

1. Nutanix Storage Configuration for VMware vSphere

2. VMware vSphere Networking on Nutanix

3. VMware High Availability Configuration for Nutanix (Coming soon)

4. VMware Distributed Resource Scheduler on Nutanix (Coming soon)

5. VMware Storage configuration on Nutanix (Coming soon)

6. VMware vSphere Cluster design with Nutanix (Coming soon)

7. Optimal Virtual Machine design with Nutanix (Coming soon)

8. Monster VM design with Nutanix (Coming soon)

ESXi Host Isolation Response and custom isolation address configuration.

Posted on by
2

I was reviewing a vSphere design recently and I came across an interesting design choice which I thought I would share.

The architect selected the isolation response of “Leave Powered On” and disabled  “das.usedefaultisolationaddress”  (which is by default enabled) and configured multiple custom isolation addresses using the “das.isolationadressX” advanced setting.

The architect explained that this was done to minimize the chance of a false positive isolation event. In many environments such as ones using IP storage or where the ESXi Management VMKernel default gateway is not highly available, this can be a very good idea.

In this environment, the storage was provided via FC and the default gateway was highly available.

So was there a benefit in changing the default setting of “das.usedefaultisolationaddress” and configuring custom isolation addresses?

The short answer is No.

This is because the isolation response is configured with “Leave Powered On” so regardless of the host being isolated or not, the Virtual Machines will remain powered on.

So keep it simple, if your isolation response is “Leave Powered On” there is no need to change either of these advanced settings.

The below articles show examples of isolation response and custom isolation addresses configurations for IP Storage, FC storage and Hyper-converged environments.

Related Articles

1. Host Isolation Response for IP Storage
2. Host isolation response for FC based Storage
3. Host Isolation Response for a Nutanix Environment

Example Architectural Decision – Default Virtual Machine Compatibility Configuration

Posted on by
2

Problem Statement

In a VMware vSphere 5.5 environment, what is the most suitable configuration for Virtual Machine Compatibility setting at the Datacenter and Cluster layers?

Assumptions

1. vSphere Flash Read Cache is not required.
2. VMDKs of greater than 2TB minus 512b are not required.

Motivation

1. Reduce complexity where possible.
2. Maximize supportability.

Architectural Decision

Configure the vSphere Datacenter level “Default VM Compatibility” as “ESXi 5.1 or later” and leave the vSphere Cluster level “Default VM Compatibility” as “Use datacenter setting and host version” (default).

Justification

1. Avoid limiting management of the environment to the vSphere Web Client.
2. The Default VM Compatibility only needs to be set once at the datacenter layer and then all clusters within the datacenter will inherit the desired setting.
3. Reduce the dependency of the Web Client in the event of a disaster recovery.
4. As vFRC and >2TB VMDKs and vGPU are not required, there is no significant advantage to HW Version 10.
5. Ensuring a standard virtual machine compatibility level is maintained throughout the environment and reducing the chance of mismatched VM version types in the environment.
6. Simplicity.

Implications

1. Virtual Machine Hardware Compatibility automatic update must be DISABLED to prevent the VM hardware being automatically upgraded following a shutdown.
2. vSphere Flash Read Cache (vFRC) cannot be used.
3. VMDKs will remain limited at 2TB minus 512b.

Alternatives

1. Virtual Machine HW Version 10 (vSphere 5.5 onwards).
2. Virtual Machine HW Version 8 (vSphere 5.0 onwards).
3. Virtual Machine HW Version 7 (vSphere 4.1 onwards).
4. Older Virtual machine HW versions.