Tag Archives: vcap

Example Architectural Decision – vSphere Path Selection Plugin (PSP) for IBM SVC Storage

Posted on by
Reply

Problem Statement

What is the most suitable multipathing policy when using IBM SVC storage?

Requirements

1. Ensure maximum performance and availability for vSphere storage
2. Ensure storage performance is as consistent as possible

Assumptions

1. IBM SVC Storage which is Active/Active
2. VAAI is supported and enabled

Constraints

1. Solution must be supported

Motivation

1. Ensure optimal performance and redundancy
2. Minimize Latency

Architectural Decision

Use vSphere Native Multipathing Plugin (NMP) and configure “VMW_PSP_RR” (Round Robin) as the path selection policy.

Set the default PSP to “VMW_PSP_RR” (Round Robin) for SATP VMW_SATP_SVC so all new LUNs automatically use Round Robin

Justification

1. Round Robin helps ensure minimum average latency to the storage by using all available paths
2. Ensure performance is not degraded for some/all virtual machines due to a single HBA or connection being heavily utilized
3. Using “VMW_PSP_ FIXED” requires the paths to be manually load balanced to avoid thrashing a single path
4. Using “VMW_PSP_MRU” or “VMW_PSP_ FIXED” may lead to incosistent performance across the LUNs due to some paths being more heavily used than others
5. There is no MPP currently supplied by IBM for SVC storage
6. Round Robin is a supported configuration (Note: Although not specifically listed in the Compatability Matrix)

Alternatives

1. Use “VMW_PSP_FIXED” (Default) – Fixed Pathing
2. Use “VMW_PSP_MRU”  – Most Recently Used
3. Use vendor supplied Multipathing Plugin

Implications

1. None

vmware_logo_ads

Example Architectural Decision – Storage DRS Configuration for NFS Datastores

Posted on by
2

Problem Statement

In a vSphere environment, a NAS array is presenting Thin Provisioned NFS mounts (Datastores) to the vSphere environment. The storage has deduplication enabled across the datastores being used for the SDRS cluster. What is the most suitable configuration for SDRS to ensure the underlying storage efficiencies are not compromised while maintaining an even distribution of utilized capacity and I/O across all datastores?

Assumptions

1. vSphere 5.0 or later
2. NFS Based storage
3. NFS Mounts (Datastores) are Thin Provisioned
4. Deduplication is enabled on the array
5. VAAI is supported by the array and enabled across the vSphere environment
6. All datastores in a Datastore cluster are of the same RAID Type / Offer Similar performance due to having a similar spindle count
7. All datastores are presented to all hosts within the cluster

Motivation

1. Ensure storage efficiencies are not negatively impacted
2. Minimize the vSphere administrators workload where possible

Architectural Decision

Set the DRS automation setting to “No Automation (Manual Mode)”

  • Set “Utilized Space” threshold to 80%
  • Set “I/O latency” to 15ms
  • I/O Metric Inclution – Enabled

Advanced Options

  • No recommendations until utilization difference between source and destination is: 10%
  • Evaluate I/O load every 8 Hours
  • I/O Imbalance threshold  3

Justification

1. Setting Storage DRS to “No Automation (Manual Mode)” ensures that the administrator can confirm the recommendation will not Negatively impact the efficiency of Deduplication or  the thin provisioned NFS mounts
2. When creating a new Virtual Machine, in the “Ready to complete” window, Tick the “Show all storage recommendations” check box to review Storage DRS recommendations and override the recommendations where required
3. Where a VM is deduplicated on the source datastore, and it is moved to the destination datastore, this write activity is considered new data which will scanned by the post deduplication process which will use valuable CPU cycles on the array
4. “XCOPY” is not supported for NFS, as such, any Storage vMotion activity can only be offloaded to the array using the “Full File Clone” when a virtual machine is powered off.
5. Array level snapshots cannot be migrated with the VM using Storage DRS. If Virtual machines were automatically moved then the array level snapshot relasionship with the VM is broken and it cannot be leveraged
6. NFS datastores can be set to autogrow  by a predefined size in the event they reach a predefined utilization threashold
7. Where a significant I/O imbalance is detected by SDRS, the vSphere administrator can consider the impact of the Storage vMotion and where suitable apply the SDRS recommendation
8. SDRS still provides valuable “initial placement” for new virtual machines which will help avoid a situation where datastores are unevenly balanced from a capacity perspective
9. Storage DRS will still analysis I/O and where an imbalance is identified the vSphere administrator can choose to apply the SDRS recommendation to address the I/O imbalance

Implications

1. When selecting datastores for the datastore cluster, having VASA enabled allows the “System Capability” column to be populated in the “New Datastore Cluster” wizard to ensure suitable datastores of similar performance, RAID type and features are grouped together
2. A vSphere administrator will need to review SDRS recommendations

Alternatives

1. Use “Fully Automated”

Melbourne VMUG Presentation 26/7/2012 – Our VCDX Journey

Posted on by
Reply

Shane White and I gave a presentation to the Melbourne VMware User group this past Thursday evening.

For those who are interested, here is a copy of the presentation.

Josh Odgers & Shane White – MVMUG July 27th 2012 – VCDX Experience